Register Tap Card

You must tap your TAP card before boarding each train. The Los Angeles Metro system uses a plastic card containing a computer chip — — for all fares. The TAP Card is used for fares on the light rail/subway and buses.

Treat your TAP card just like you would a debit card or state ID. Register your card for Balance Protection at taptogo.net or 866.TAPTOGO (827.8646), and you’ll be able to recover your pass or cash balance if your card is ever lost or stolen.

Each person needs a TAP Card — no sharing. The only exception: two children under 5 years old may ride for free when accompanied by a paying adult.

To ride the LA Metro light rail/subway, you need to tap your TAP Card for each train you ride. One-way fares include free transfers in the same journey for up to two hours; no stopovers or doubling back are permitted. TAP Cards can be loaded with single-ride fares, dollar amounts, or pass fares. All Metro ticket vending machines dispense TAP Cards for $1.00 in addition to the fare or pass loaded on them at the time of purchase. Once you have a TAP Card, it can be reloaded at any Metro ticket machine.

The automated ticket machines are easy to use and give step-by-step instructions in several languages. The help button activates in-depth instructions. For a better view of the steps, click on the photos to enlarge.

How to Buy Your TAP Card and Load Your Fare. To add value or a pass to your TAP Card, or to check the status of your card, press the appropriate button, tap your card on the ticketing machine, and follow the instructions. Tap your TAP Card on the machine to complete your transaction.

Select Your Fare: Payment can be made using cash, credit cards, or debit cards. Ticket machines accept $20 and smaller bills and coins. The machines dispense $1 coins instead of bills for change, so you might end up with a lot of coins if you insert a $20 bill. The fares that can be added to a regular TAP Card are: A – 7-Day Pass; C – One Ride fare; F- Regular Day Pass; G – 30-Day Pass. H- Senior/Disabled peak fare; I – Senior/Disabled off-peak fare. Fares have increased from those shown here, effective September 15, 2014. Regular one-ride fares are $1.75.

The senior or disabled fare is $.75 during peak hours and $.35 non-peak. A regular DayPass is $7 and is valid from the first tap until 3 a.m.

The following morning. If you’re taking more than five trips in a day, the DayPass saves you money.

A 7 DayPass is $25 and is the best bet if you’ll be doing 17 or more trips during a week. A 30 DayPass is $100.

The valid time period for a 7 DayPass or 30 DayPass begins on its first use. It doesn’t matter if it’s the beginning, middle, or end of the week or the month. Load Dollar Value for Easy Riding. Lump-sum dollar values can be added to a TAP Card. The amount of each fare is then deducted when you tap for the first leg of each trip. This is an easy way to handle multiple trips. Lump-sum dollar amounts can also be added to your TAP Card.

When tapped on entry, the amount of a regular one-way fare will be deducted from your balance unless a valid pass is loaded on the card; a pass takes precedence over one-way fares. For example, if you have a cash balance on your TAP Card and you buy a DayPass, your cash balance will not be reduced during the day that you use the DayPass. Discount TAP Cards Require Special Purchase. Senior and disabled TAP Cards are eligible for discounted fares. Senior and disabled TAP Cards are not sold at the automated ticket machines.

These cards, which allow loading of discounted passes, require an ID and must be obtained either from a or with a that is mailed in. Ticket machines recognize the status of these cards and allow the loading of discounted passes. Senior and disabled DayPasses are $2.50 and can be loaded only on these special TAP Cards. With this good value, it is worth the effort to get your special TAP Card if you qualify. When lump-sum dollar amounts are loaded on these special TAP Cards, the discounted one-trip fare amount is automatically deducted at the first entry unless a valid pass is loaded. Student discount TAP Cards are also available through Metro and some schools. See for more information.

When you tap your TAP Card, you can see your fare status. If you tap more than once, the entry monitor will tell you that your card has been tapped. The TAP Card registers if it has been tapped at the entry gate. Tap your TAP Card for each train you ride. You’ll find the TAP validators on the turnstile or next to the train platform entry. If you’re changing from the Red/Purple Line to the Expo or Blue Line in the 7th/Metro Station, there are TAP validators near the stairs on the Expo/Blue Line level. Metro monitoring personnel have machines that read these cards.

If you don’t have a valid TAP Card fare or transfer, you’ll be socked with a hefty $250 fine. Turnstiles at Metro stations operate in both directions. It is necessary to press the TAP Card to the blue circle on entry. Turnstiles are unlocked for exiting passengers; no TAP Card tap is needed.

For more information on using Metro, see our pages on. All photography, graphic images, and text copyright © and may not be downloaded or used without written permission. Shotgun serial number lookup. Please contact us to license usage of images or text. For Metro Oriented News, Like Us on Facebook: If you enjoy our MetroDuo blog, please subscribe. We don’t want you to miss a MetroDuo adventure!

Yes, your discount TAP Card (student, senior, disabled, etc.) can be used repeatedly in one day as long as you have loaded enough fares or money on it. A good idea is to load a student discount Day Pass on your student TAP Card if you are riding a number of times in one day. The discount cards are programmed to accept loading of discount fares (regular TAP Cards will not accept discount Day Passes, for example) or to use the “added value” at the discount rate. For Metro’s official info. Well, so in that case what is a person supposed to do?

Are they supposed to pay the fair worth the driver.with cash? I don’t think you can pay by any other method then a timecard.

So if you have your tap card and let’s say it has $100 on it and for whatever reason it doesn’t scan correctly what are you supposed to do if you don’t have any money to buy another card.but actually buying a new tap card will likely not solve the problem if it’s the scanner. So when the train police approach you, weill you be able to prove that your card was at least tapped, albeit then rejected, or will there be no record of your tap since it wasn’t successful.

In other words, does your Card keep track of both successful and unsuccessful taps? Thanks for your comments.

We have found that occasionally TAP cards aren’t properly read by the validators. In those cases, the validator will indicate that fact.

• Output formats: DXF R9/10/12/13/14/15/18/21, and DWG R12/13/14/15/18/21. • Not dependent on other PDF readers. • Independent of AutoCAD or other CAD applications. • Support all versions of PDF specifications from PDF 1.1 to PDF 1.8. Convert pdf to autocad 2000 pdf. • Convert PDF to DWG or DXF files in batches.

Turnstile validators will flash red and the turnstile will not unlock; standalone validators have a window that will indicate an error. Both types of validators have different beeps to indicate whether or not the card was successfully read. If there is a card reading error, we’ve always found that tapping the card again is successful. We don’t know if the cards register unsuccessful taps, but we doubt it. If there’s any question about the amount of money stored on your TAP Card, the fare machines let you check the card’s balance. Each Metro station has an intercom box that directly contacts Metro headquarters, so if you have a problem with a TAP card that has enough money on it to pay a fare, use the intercom to ask Metro what to do.

Incidentally, Metro buses have fare boxes that accept bills and coins but do not give change. The only Metro bus stops that have fare machines are the Orange and Silver Line stops, and those buses do not have fare boxes TAP Cards are required to ride those lines, and the Silver Line has a fare surcharge.

Thanks for reading our blog and thanks again for your comments. No, they can’t.

I’ve tried to use this link (which just takes you to the home page), and clicked “Manage your tap card on line”. You can only add fare products and check your contact information. There is a section called “My Cards”, but if you click on it, it gives you all the info for each card EXCEPT THE BALANCE. I’ve even tried clicking under “Trip History”, but no records show up there.

It seems that it would tell you the balance if you’ve ridden within a certain amount of time, but the reason I don’t remember how much is on there is because I HAVEN’T ridden in a while. You can only check your balance at a tap card station (like this blog mentions). There is no way to check a balance on line. I’ve scoped the web, and no one has a direct link, or specific path to checking an LA Metro tap card balance on line. I just tried following these instructions and the website has evidently changed.

Today, click “My TAP Cards” then “View History” to see the current stored value. However, this will not show recent money put onto the card via your credit card using the website, unless you’ve TAPped (used for fare) your card within the right amount of time (at least 48 hours but less than 30 days). To see recently paid for but not yet loaded money, click “My Account”, scroll down to “Order History” and you should see a reference to your transaction. Click the plus sight at the right end of the reference and it will tell you your card number and how much you paid to put on it. This money is supposed to load onto your card the next time you TAP it, if you TAP it within the right amount of time (at least 48 hours but less than 30 days). If you’ve waited more than 30 days, you have to telephone them to load your money onto your TAP card.

My wife is not an frequent tap card user. This morning she deposited 5 dollars in cash at the Sierra Madre station to buy a daypass. She used the tap card to pass the machine gate and used the same card to pass the gate machine for a transfer at union station to the red line. But when she exited at the Vermont & Wilshire station the inspector said her tap card is invaild & issue a $75(failure to pay) violation and had to buy a second day pass.We don’t think this is right.

Please tell us how to file a complaint to clear this voilation and get back the money she used to buy the 2nd daypass. We’re sorry to learn of your experience. We are not part of Metro, so we aren’t able to help you directly. However, we took a quick look at Metro’s website and found two ways to contact their customer relations group: Their e-mail address: Their phone contact: 213.922.6235 8:00am – 4:15pm (Monday-Friday) We passed through the 7th/Metro station yesterday and today while changing lines, and we noted that some of the TAP consoles by the stairs were being serviced and were not working. While they were taped over and marked, we observed some people tapping their cards on them.

Perhaps this is what happened to you. We hope you can get this resolved easily. What can I do if I have a regular TAP card with, say, $20 loaded on to it and usually only ride twice at a time (meaning, out and back again, or one round trip, on the day when I do use it) but sometimes end up on multiple rides? For instance: today we went to Culver City on the Expo line around lunchtime and then later decided to go to North Hollywood on the Red Line for dinner, and we’re going to stop in Hollywood for a drink on the way back. It’s going to charge me 5 x $1.50, isn’t it?

Or would it basically consider this a day pass and stop at $5? Since I don’t usually ride 4 stretches in one day, if I load a day pass on to the card, will it automatically activate the day pass if I only use it for the one round trip?

(thus wasting the rest of the value?) Or is there a way to tell the turnstile, “this time use a single $1.50 deduction” vs “this time use the day pass value”? Not sure if you will see this, but I’m wondering if it is possible to load a TAP with multiple single rides. We are thinking of making 4 metro rail trips while in LA (2 return). We don’t want to use cash as there is no $6 option, so I am wondering if after purchasing a TAP + single ride for $2.50 at a red line machines we can immediately add 3 more single trips (using three transactions). If so this would mean we only need to go to the machines once. If not we will have to go to the machine each time, which is less convenient.

I would much appreciate a reply. Hi Hamish, We’re not employees of Metro, so we don’t have official insight into the workings of the TAP Cards. However, we have actually done this — added multiple rides. We found that while you can load multiple rides onto a TAP Card, the card doesn’t register them the same way as when you load a dollar amount — so get a receipt printed and keep it. Our experience was that the rides were deducted when we tapped the card, but the card reader showed no rides loaded. We tried this when we were traveling with a senior who didn’t have a senior TAP Card.

We bought a regular TAP Card and then loaded six senior rides. Each ride was deducted when the card was tapped. However, during the journey, the card was checked by a sheriff and the rides did not register on his card reader. Fortunately we had receipts for the rides loaded all at the same time and the sheriff did not issue a ticket. We suggest that loading a day pass or adding value is a much easier way to use the TAP Cards — as this seems to be how they were setup. Thanks so much for such a comprehensive reply. Your knowledge on this subject is obviously very good.

Based on what you’ve said I’ve decided we will add one ride each to out tap cards before each train ride. Using day passes or cash, although more convenient, would cost us considerably more, hence I have ruled out that option. It is interesting to read about TAP. In Auckland where I live a new card called HOP is being rolled out, and eventually cash will be the only option, with caps instead of passes, and single rides still on paper.

Short-term users however will not use our card because it costs $10. This is because the card is charged after completing a ride (we have to tag off), which is because unlike LA we don’t have a flat fare. And obviously the charge for the card has to be greater than the maximum charge on the network or people would simply buy a card to ride with not have any balance (it supports negative balance), and instead buy a new card for each trip.